Yellow Skid Pipe for Xlpower Specter Models, Also fits tron gemini/orion and Dnamic

Red  Skid Pipe for Xlpower Specter Models, Also fits tron gemini/orion and Dnamic

Green  Skid Pipe for Xlpower Specter Models, Also fits tron gemini/orion and Dnamic

This is the all new 700 sized Goosky RS7 helicopter Building on the success of the Goosky S2 and RS4, Goosky has now launched its first 700-sized helicopter – and...

XGUARD PLUS C60 V3 POWER BACKUP SYSTEM 60F W/TELEMETRY, ALARM, REMOTE OFF & RADIO SWITCH PORTS ***NOTE***: To activate the radio switch hold the OFF button while powering the unit....

XGUARD PLUS C30 V3 POWER BACKUP SYSTEM 30F W/TELEMETRY, ALARM, REMOTE OFF & RADIO SWITCH PORTS ***NOTE***: To activate the radio switch hold the OFF button while powering the unit....

GDW G55 Brand: GDWModel：G55HVDead band: 2μs 760μs / 333hzMotor: Brushless MotorOperating Speed (6V): 0.06sec/60°Operating Speed (7.4V): 0.05sec/60°Operating Speed (8.4V): 0.045sec/60°Stall Torque (6V): 5kg.cmStall Torque (7.4V): 6kg.cmStall Torque (8.4V): 7kg.cmDimensions: 15*36*31.5mmWeight:...

G50规格书 General Specs Operation Voltage Range 电压范围 4.8V up to 8.4 V Operation Temperature Range 适应温度 -20C°up to +60C° Working frequency 工作频率 1520us/333Hz 测试参数 Bench tests reported values 电压 Test...

High voltage, High-Torque, low profile size brushless tail servo.Ideal servo for smaller helis (500-600) size that require a standard size servo that is lighter offering excellent weight savings!The Servos are...

Latest flybarless system from rotorflight.  The NEXUS Flybarless (FBL) control unit has been designed from the ground up based on the Rotorflight 2.0 reference design. All aspects of the NEXUS...

All New Goosky RS5  The RS5 can accommodate 550 to 600mm blades, using 12mm main shaft and 6mm tail shaft and 30mm tail boom for rigidity. Battery tray is slide...

XLPower Nimbus 550 V2  We are please to announce some exciting new features of the Nimbus 550 V2! This latest version is packed with enhancements and improvements that make it...

All New Goosky RS5. The RS5 can accommodate 550 to 570mm blades, using 12mm main shaft and 6mm tail shaft and 30mm tail boom for rigidity. Battery tray is slide...

1 * Goo-Sky Pit Mat

Excellent choice for Nimbus Mini Servo Version or Tron 5.5. The THM series of Theta Servo is a mini size brushless servo that is capable of handling high voltage of...

Xlpower 650 boom. Factory painted Red

Xlpower 650 boom. Factory painted yellow

Replacement RS7 Landing Skid in White

Replacement RS7 Boom in Factory painted yellow

Our latest innovation adjusts the distance of the inner disc ball head to match the main propeller clamp pitch control ball head, achieving an impeccable 1:1 control ratio of the...

By fitting this part at this end of the tail boom opening, the tail boom will not deform in any way when locking the fuselage to clamp the tail boom...

DNAMIC 4225-550 KV MOTOR ( 10-12S applikation ) FOR 580-700MM BLADE SIZE LIGHTWEIGHT HELICOPTERS 3 Large NSK 698ZZ Bearing (8x19x6mm) 1.2mm HQ copper wire. High quality NdFeB Magnets. Heat resistant...

Complete your RS7 Build with top quality products. Scorpion Power system and Vbar evo. No servos in this combo. Contact for Options. Scorpion HKII-4525-520KV – ULTIMATE (6mm 55mm) Scorpion Tribunus...

This is the all new 700 sized Goosky RS7 helicopter   Kit only, no electronics. Needed to Complete: Transmitter (7-channel or more, helicopter system) Receiver (7-channel or more) (2) 6S...

The all new 700 sized Goosky RS7 helicopter. Kit only, no electronics. kit includes azure az700 main blades and az106 tail blades. Needed to Complete: Transmitter (7-channel or more, helicopter...

  The new Tron 7.0 DNAMIC ultralight 700 class Helicopter delivers stunning flight performance starting from 6S up to 12S lipo battery configurations.The DNAMIC was already considered in the development...

New and improved Tron 5.5.  Main blade size / 550-560MM ( not included ) Tail blade size  / 92-97MM ( not included ) Dry weight / (1400) grams without blades...

High Power Synchronous Dual Channel, with Smart Charging.Smart High Speed Processor delivers parameter interfere to each port.Hassle Free with Maximum charging power up to 500W for single port.Choose ISDT, Powered...

The iSDT PD60 60W 6A 1-4S USB-C Input Battery Charger includes a USB-C Power input that supports QC 2.0/3.0 and USB PD 2.0/3.0 and 5-20V voltage input.This battery charger can...

INTRODUCING THE NEW NIMBUS NITRO: Nimbus 550 Nitro comes suited for the most common full size servo configuration, with option parts if you prefer to use mini servos, a pre-painted highly visible canopy, and bolt together easy building for getting you from the box to the air in no time. This airframe is built for flyers who want to fly as much as possible with the least amount of maintenance.  ---It features a proven tapered clutch system adopted from the Nitro 700, making it the smoothest and easiest-to-align clutch stack available on the market.---With a 7.7 gear ratio, it is perfectly matched to achieve a good rotor RPM while providing enough torque for demanding maneuvers with 550-580mm blades. Optional parts are available to stretch it to a 650-size with an 8.5 gear ratio. Engine maintenance is made easy with the ability to remove the engine from the bottom without disturbing other assemblies, taking only a few minutes.---The main gear directly drives the head and has been designed to efficiently transmit rotor torque, producing peak power through extreme rigidity.---The core of the airframe consists of a single-piece 7075 aluminum bearing block assembly and servo mount, which provides rigidity to the frame and drivetrain.---The cyclic servos are arranged in a 120-degree layout for optimal control geometry.---The main gear hub utilizes two one-way bearings, ensuring reliability even under extreme power combinations. Additionally, the large diameter tail boom eliminates the need for boom supports. As usual with a kit, there is no motor or Electronics Included. You will need:  .50 sized nitro engine Exhaust...

This program box allows you to modify all the parameters on your Theta servos. You can change the centering, direction or even change pulse width or current draw. Practically every...

High voltage, High-Torque, standard size brushless servo.Ideal for 550 all the way up to 800 class helicopters. Suitable also for airplanes as well as for throttle and steering in cars....

High voltage, High-Torque, standard size brushless servo.Ideal tail servo for 550 all the way up to 800 class helicoptersThe Servos are at the top of their class due to their...

We introduce the fifth generation of Scorpion's renowned and award winning "HK - Series" motors. The Scorpion "HK5 - Series" The HK5 Series lives up to and exceeds our standards...

Use on All Nitro Helicopters

Excellent Choice for Xlpower and Evo 380- Cyclic Servos. Rs4 and rs4 venom and all heli is this size range.

High voltage, High-Torque, mini size brushless servo.Ideal tail servo for 380 sized machines.· High Voltage· High Speed· Excellent Centering· Compatible with Futaba type horns/arms· Light Weight Voltage（V） Current（A） Speed (s/60°) Torque (kg*cm) 5 2 0.08 6...

High Torque , High Voltage, Mini Tail Servo

High Voltage , High Torque, Brushless Mini Servo Excellent choice for Nimbus Mini Servo Version

High voltage, High-Torque, standard size brushless servo.Ideal tail servo for 550 all the way up to 800 class helicoptersThe Servos are at the top of their class due to their...

High voltage, High-Torque, Low-Profile brushless servo(The motor is the same as the standard servo)550, 600 and even 700 class helicopters swashplate servoairplanes1/10 Touring Car1/10 Formula Car1/8 Off-road Car1/8 Racing Car...

High voltage, High-Torque, standard size brushless servo.Ideal tail servo for 550 all the way up to 800 class helicoptersThe Servos are at the top of their class due to their...

High voltage, High-Torque, standard size brushless servo.Ideal for 550 all the way up to 800 class helicopters. Suitable also for airplanes as well as for throttle and steering in cars....

New and Improved Xlpower Nimbus 550 Swashplate and included are various ball lengths to achieve desired flight characteristics.

Use on your nimbus 550 swashplate to achieve truth 1:1 linkage geometry

Factory painted booms for your Nimbus 550

Used for all Specter 700V2 and Nitro Also Uses Xl70T14-3

Used for all Specter 700V2 and Nitro